Dinion2X
Configuration | en
33
Bosch Security Systems
Installation Manual
AR18-08-B013 | v1.0 | 2009.03
Selecting an area for VMD masking
To set-up an area for VMD masking, access the area menu by
selecting the
VMD Area
option from the VMD menu. Upon
entering the
Area
menu, the current area is displayed with the
upper left corner flashing. The flashing corner of the image can
be moved with the Up, Down, Left, Right arrow keys. Pressing
the Select key moves the flashing cursor to the opposite corner,
which can now be moved. Pressing Select again freezes the
area and exits the area menu.
There is one programmable VMD area.
Note:
When VMD is enabled, normal light fluctuations or
environmental factors can contribute to false-positive alarms.
Because of this, it is recommended that you do
not
connect the
VMD-triggered alarm output of the camera to a monitored alarm
system as the false-positive alarms may be considered a
nuisance.
