Bosch Dinion2X NBN-498 Installation Manual Download Page 6

Page: 6 / 62

en | Safety

Dinion2X

AR18-08-B013 | v1.0 | 2009.03

Installation Manual

Bosch Security Systems

Use only replacement parts specified by the manufacturer.

Install in accordance with the manufacturer's instructions

in accordance with applicable local codes. Use only

attachments/accessories specified by the manufacturer.

Equipment change or modification could void the user's

guarantee or authorization agreement.

1.3

System ground/Safety ground

System (video) ground is indicated by the symbol

Safety (power) ground is indicated by the symbol

The system ground is only used to comply with safety standards

or installation practices in certain countries. Bosch does

not

WARNING!

Power disconnect for high voltage versions: A unit has power

supplied whenever the power cord is inserted into the power

source. The power cord plug is the main power disconnect for

the unit. For pluggable equipment, install the socket outlet near

the equipment so it is easily accessible.

WARNING!

All-pole power switch: Incorporate an all-pole power switch,

with a contact separation of at least 3 mm in each pole, into the

electrical installation of the building.

CAUTION!

Fuse rating: The branch circuit protection must be secured with

a maximum fuse rating of 16 A. This must be in accordance with

NEC800 (CEC Section 60)

CAUTION!

The Low Voltage power supply unit must comply with EN/UL

60950. The power supply must be a SELV-LPS unit or a SELV -

Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

Summary of Contents for Dinion2X NBN-498































































Search results

Summary of Contents for Dinion2X NBN-498

Reviews:

Related manuals for Dinion2X NBN-498

Brands by name

Popular brands

Bosch Dinion2X NBN-498, Installation Manual

Search results

Summary of Contents for Dinion2X NBN-498

Reviews:

Related manuals for Dinion2X NBN-498

Brands by name

Popular brands