Bosch DiBos Operation Manual Download

Page: 83 / 90

DiBos/DiBos Micro

Operation - Playback Mode | en

Bosch Sicherheitssysteme GmbH

Operation Manual

F.01U.033.372 | V5 | 2009.09

7.8

Showing Exported Files

Recording

Load exported video

Exported audio and video files can be shown in order to display

their saved images.

Select the

Recording

Load exported video

menu.

Select the drive on which the exported files are located.

The files are displayed in the list field beneath the drive.

In the list box, click the file whose images you want to

view.

Click

An additional tab

is added to the device list and

the names of the exported cameras are displayed.

Double-clicking the camera icon shows the image in the

selected window of the image area. The image can be

displayed in any window at all using the "Drag and drop"

function. If several cameras are assigned to one remote

station, you must first double-click the remote station.

Only then are the cameras listed and can be selected by

double-clicking.

NOTICE!

–

In the timeline, the time is shown for the time zone that

applies to the system into which the data is being

imported.

–

Select the

Recording

Hide exported video

menu to

remove the exported files from the display.

Summary of Contents for DiBos



























































































Search results

Summary of Contents for DiBos

Reviews:

Related manuals for DiBos

Brands by name

Popular brands

Bosch DiBos, Operation Manual

Search results

Summary of Contents for DiBos

Reviews:

Related manuals for DiBos

Brands by name

Popular brands