Bosch DiBos Operation Manual Download Page 63

Page: 63 / 90

DiBos/DiBos Micro

Operation - Live/Playback Mode | en

Bosch Sicherheitssysteme GmbH

Operation Manual

F.01U.033.372 | V5 | 2009.09

5.2

Automatic Alarm Recording

Incoming alarms can be recorded automatically (standard) or

manually on the recipient. The selection is made in the

configuration. In both cases, all the cameras that are assigned

to the alarm in the device list are displayed. Recording takes

place without audio.

The

tab flashes red. An audio signal sounds, if this has

been configured.

Click the

tab. The cameras or remote stations in

alarm status are listed. The audio signal is switched off.

The button for alarm recording

is displayed.

Click the

icon if you want to stop alarm recording.

Alarm recording is stopped.

Click the button to start alarm recording.

Alarm recording is started.

Click the button to stop alarm recording.

NOTICE!

–

Alarm recording finishes when the alarm is deleted.

–

The button for alarm recording is immediately displayed

when incoming alarms are automatically displayed (see

Section 5.1.2 Automatic Display of Incoming Alarms

Summary of Contents for DiBos



























































































Search results

Summary of Contents for DiBos

Reviews:

Related manuals for DiBos

Brands by name

Popular brands

Bosch DiBos, Operation Manual

Search results

Summary of Contents for DiBos

Reviews:

Related manuals for DiBos

Brands by name

Popular brands