24
Removing the filter:
Warning:
The halogen bulbs must be
switched off and cool.
1.
Remove the metal-mesh filters.
2.
Depress the catches on both sides of
the filter and remove the activated
carbon filter.
3. Replacing the activated carbon filter:
❑
A replacement filter can be obtained
from any authorized dealer
(see optional accessories).
❑
Use original filters only.
This will ensure maximum
performance.
4.
Insert the grease filters.
Disposing of the old activated carbon
filter:
❑
Activated carbon filters do not contain
any pollutants and can be disposed of
with domestic refuse.
Filters and maintenance
3.
Engage the catches at both sides.
4.
Insert the metal-mesh grease filters (see
”Removing and inserting the metal-mesh
grease filters”).
5. Cancel the
ã
display.
❑
Press the
L
button for at least
3 seconds.
The
ã
display then goes out.
Saturation indicator:
When the activated carbon filter is satura-
ted, an acoustic signal is emitted for 6
seconds when the fan has switched off and
ã
is displayed. The activated carbon filter
should then be replaced immediately.
Activated carbon filter:
For neutralizing odours in recirculating
mode.
Caution:
As the filter becomes more and more
saturated with grease, there is an increased
risk of fire and the function of the extractor
hood may be impaired.
Important:
Change the activated carbon filter promptly
to prevent the risk of fire from the
accumulation of heat when deep-fat frying
or roasting.
Inserting the filter:
Warning:
The halogen bulbs must be
switched off and cool.
1.
Remove the metal filters
(see "Removing and inserting the metal
grease filters").
2.
Insert the activated carbon filter.
