34
Switching over from exhaust air to circulating air mode
Switching the electronic control system
to circulating air mode:
❑
The extractor hood has been set to
exhaust air mode at the factory.
❑
Before the mode can be changed, the
extractor hood must have been
connected and should be switched off.
1.
Press and hold down the
L
button.
2.
Press the button for approx.
3 seconds.
❑
A
ã
is displayed.
3.
Release the buttons.
❑
The display goes out shortly
afterwards.
Resetting to exhaust-air mode:
1.
Repeat the procedure.
❑
A
#
is displayed.
2.
Release the buttons.
❑
The display goes out shortly
afterwards.
