2 609 140 572 | (8.9.08)
Bosch Power Tools
6
|
General Safety Rules
WARNING! Read all
instructions. Failure to
follow all instructions
listed below may result
in electric shock, fire
and/or serious injury.
Safety Rules for
Anglefinders
f
When using the angle informa-
tion provided by this tool to cut
materials, always observe all of
your saw’s instructions, includ-
ing those for positioning and
clamping the workpiece. In
some cases, it may not be pos-
sible to set the required angles
on a particular saw or type of
saw, and an alternative means
of performing the cut will need
to be used.
f
For extremely acute (sharp)
angles, it may be necessary to
make the cut using a taper jig
with a table saw or circular
saw.
Functional Description
Intended Use
The Bosch DAF220 Miterfinder™ is
a versatile angle measuring tool de-
signed for the following uses:
– Anglefinder – Precisely mea-
sures the exact angle of existing
structure or workpiece.
– Protractor – Precisely positions
the workpiece or intended cut
line at the desired angle
– Miter Cut Calculator – Deter-
mines the exact miter setting
needed for simple miter cuts
daf220_bu_2609140572_003.fm Seite 6 Montag, 8. September 2008 2:22 14
