2
Introduction
Your security system helps to secure life, property, and investments
against fire, theft, and bodily harm. The Command Center is an arming
station that offers a variety of features. Function, versatility, and ease of
operation make the Command Center the ideal system for the home or
office.
With custom programming, the Command Center is tailored to meet your
individual needs. The Command mode allows you to perform a variety of
functions with maximum simplicity - only the touch of two or three keys is
required to control almost every feature on the Command Center. Three
function keys allow common commands to be performed with the touch of
just one key.
The Command Center - putting the control of your security system right at
your fingertips.
Maintenance and Service
The Command Center requires very little maintenance, however, the
system should be tested weekly to insure early detection of a need for
service. A test schedule and maintenance program can be arranged with
your alarm company. If a change in operation is noticed during normal
use or testing, call for service as soon as possible. Do not attempt to
repair the control panel, arming stations, or detectors yourself.
Call _________________________________________ Before Testing
The security system is connected to this telephone number:
__________________________________________________________
The security control panel is connected to the phone jack located:
__________________________________________________________
AC Power Failure
If your command center indicates that AC power has failed, and you have
power in the remainder of your premises, there may be a problem with the
electrical transformer or circuit breaker supplying power to your security
control panel. First, check to be sure that the transformer is securely
plugged into the electrical outlet. If it appears to be damaged in any way,
do not attempt to repair it. Call your security company for service.
Transformer location: _________________________________________
If the transformer is plugged in, check the circuit breaker supplying power
to the outlet. If the breaker is tripped, reset it. If it trips again, the overload
condition must be corrected.
Circuit breaker location: _______________________________________
INDEX
Fire Safety
1
Security System Basics
3
The Command Center Keypad
5
Turning the System On and Off
6
Silencing and Reporting Alarms
7
Command Center Alerting Tones
8
System Commands
9
Security System Glossary
28
Security System Limitations
29
