25
Bypass a Point
❒
I have this feature.
❒
I do not have this feature.
❒
This feature requires a passcode.
The Command Center makes it easy for you to have complete control of
your security system. With COMMAND 0 you have the ability to bypass
points you do not want included in the system. You can bypass points
when an area is disarmed. Bypassing a point reduces the level of security
and should be used with discretion. Points remain bypassed until you
unbypass them (see
Unbypassing a Point) or some points may return
when the area is disarmed.
COMMAND
0
To use Bypass aPoint:
1. Ensure that your security system is disarmed.
2. Press the COMMAND bar. The Command Mode indicator light comes
on.
3. Press the 0 key. The system is now in the Bypass mode. (Some points
may be set by your alarm company so that they cannot be bypassed).
4. To bypass a point, press the key that corresponds with the number of
that point, and then the ENT key. The point status light corresponding
to the bypassed point will flash, indicating that the point has been
bypassed.
