background image

Fire System 

|

 User’s Guide

 | 11.0 

System Functions 

 

 

Bosch Security Systems, Inc. | 8/06 | F01U011793B 

28 

 

Faulting a point more than once does not increment the 
test count. However, the keypad emits a brief tone and 
displays the point text each time you fault the point, 
allowing you to test multiple devices assigned to one 
point. 

5.

 

When all points are tested, 

0 PTS TO TEST

 appears. 

Press [ESC]. The display shows 

ALL PTS TESTED

 

briefly before returning to idle text. 

6.

 

To see any remaining untested points during the Fire 
Test: 

a.

 

Press the [ESC] key and 

VIEW UNTESTED ?

 

appears.  

b.

 

Press [ENT]. The display shows 

# PTS UNTESTED

c.

 

Press [NEXT] to see a list of the points that were not 
yet tested.  

d.

 

Press the [NEXT] key to move through this list.  

e.

 

To resume the Fire Test, press [ESC].  

## PTS TO 

TEST

 appears. 

7.

 

Press [ESC] twice to leave the Fire Test mode. 

Automatic time-out returns the system to idle text:

 If 

there is no point or keypad activity for 20 minutes, the fire 
test ends automatically. The keypad returns to idle text. 

Summary of Contents for D1255RB













































Reviews: