Fire System
|
User’s Guide
| 7.0
Status LEDs
Bosch Security Systems, Inc. | 8/06 | F01U011793B
21
6.7 Non-Fire
Trouble
Events
You can program your keypad to emit a repeated pattern of
three warble tones, followed by a pause when a trouble
event, such as an AC failure, occurs.
The keypad display shows the number of non-fire trouble
(
A1 ## TROUBLES
), then custom text for each activated
point.
Silencing Non-Fire Trouble Events
To silence a non-fire trouble:
•
On the D1255RB Keypad, enter a personal passcode and
press [ENT].
•
On the D1256RB Keypad, press [TROUBLE SILENCE].
To clear the trouble message from the display, enter
[COMMAND] [4]. To review cleared troubles, use [NEXT]
and [PREV] or the
VIEW MEMORY ?
function.
7.0 Status
LEDs
Four LEDs provide a quick indication of the fire system
status.
Table 1: Status LEDs
LED
Activates:
Turns off when:
Fire
•
When fire alarm
condition exists.
•
All fire alarm points
return to normal.
Silenced
•
After an alarm condition
is silenced.
•
[ANNUNCIATOR
RESET] key is pressed.
Supervisory
•
When any point
programmed as
supervisory is
not normal.
•
All supervisory points
that are not normal
return to normal.
Trouble
•
When any system
trouble or point trouble
exists.
•
The system and all
points return to normal.
