1 689 975 229
2011-09-16
|
Robert Bosch GmbH
66 | CRS 845H | Trouble-shooting
en
8.
Trouble-shooting
Fault
Remedy
Refer to Section
The serial number and calibration date of the pressure
sensor 1 681 032 095 are not displayed in the
External
pressure sensor
box.
1. Install the driver of the pressure sensor 1
681 032 095 (for driver, refer to
C:\BOSCH_
PR\EPS945\DRIVERS\BURSTER
or
C:\BOSCH_
PR\EPS945\DRIVERS\BURSTER\X86
).
3. Check the pressure sensor connection.
2. Re-start the PC unit.
7.2
7.3
----
The message "Emergency stop, doors open" is called up
although folding doors are closed and all LEDs at the
safety switches are lit.
Check and align all safety switches.
6.3
After calibrating the high-pressure rail, the measured val-
ues exhibit a difference in pressure of >0.5 MPa
1. Condition the high-pressure rail
2. Repeat calibration
3. Replace both pressure sensors B9 and B10
7.6
7.7
6.6
Summary of Contents for CRS 845H
Page 76: ......
