Bosch CRC R-1 Installation And Operating Instructions Manual Download Page 6

Operation

 

Climate Room Control – 6721841498 (2022/04)

62

Table 27

5

Operation

5.1

Overview wired room controllers

Keys of the wired room controller
Key to figure 3:

[1] Receiver for infrared remote control
[2] Display of the wired room controller
[3] Keys of the wired room controller

Table 28 Keys wired room controllers

Display of the wired room controller
Key to figure 4:

[1]  Display of main operating modes
[2]  Display of temperature and status
[3]  Display time
[4]  Timer display

Table 29 Symbols in the display

5.2

Setting the day and time

▶ Press  the 

TIMER

 key until the timer display starts flashing.

▶ Select the current day with the 

.

 and 

/

 keys. The selected 

day flashes.

tLo

Minimum value of adjustable temperature

17

...24 °C

rEC

Switch the control on/off via the remote 
control.

ON

: on

OF:  off

Addr

Set the addresses of the wired room 
controller. If there are two wired room 
controllers in the system, each wired room 
controller must have a different address.

--

: only one wired room controller in the 

system

A: primary wired room controller with the 
address 0.

B: secondary wired room controller with 
the address 1.

Init

ON: restore factory settings.

Key

Function

K

Switch on/off.

M

Set operating mode.

DAYOF
F

Day off/deletion.

. /

Adjust up/down setting.

 

Confirm choice.

TIMER

Set timer.

Fan step

d

Navigate back.

Set swing function.

FUNC.

Set function.

COPY

Copy/adopt data.

Parameters

Description

Pos
.

Symbo
l

Explanation

1

Display of main operating modes

Operating mode: automatic mode

Operating mode: cooling mode

Operating mode: dehumidification mode

Operating mode: heating mode

Operating mode: Fan Mode

K

Operating mode: On/Off

2

Display of temperature and status

Value display: shows the current fan speed. 
There are several output stages (bars) and the 

AUTO

 setting for automatic control

Value display: indicates the set temperature as 
standard.

Infographic: keylock

Infographic: appliance 1/2

Infographic: Turbo cool/Turbo heat is active.

Infographic: room temperature

Infographic: automatic rotation is active.

Infographic: Follow me active.

Infographic: automatic swing function is active 
(up/down or left/right).

3

Time  display

Value display: indicates time.

4

Timer  display

Infographic: timer On/Off

Infographic: weekdays active

Infographic: day

Infographic: week

Summary of Contents for CRC R-1

















Reviews: