Bosch CRC R-1 Installation And Operating Instructions Manual Download Page 11

Troubleshooting

67

Climate Room Control – 6721841498 (2022/04)

7

Troubleshooting

7.1

Faults with indication (Self diagnosis 
function)

If a fault occurs during operation, a fault code (e.g. EH b3) 
appears on the display. Refer to the technical documentation of 
the system components for fault codes not listed here.

The wired room controller may display a different fault code to 
the indoor unit, although it is referring to the same fault.

Table 30

8

Environmental protection and disposal

Environmental protection is a fundamental corporate strategy 
of the Bosch Group. 
The quality of our products, their economy and environmental 
safety are all of equal importance to us and all environmental 
protection legislation and regulations are strictly observed.
We use the best possible technology and materials for 
protecting the environment taking account of economic 
considerations.

Packaging

Where packaging is concerned, we participate in country-
specific recycling processes that ensure optimum recycling. 
All of our packaging materials are environmentally compatible 
and can be recycled.

Used appliances

Used appliances contain valuable materials that can be 
recycled. 
The various assemblies can be easily dismantled. Synthetic 
materials are marked accordingly. Assemblies can therefore be 
sorted by composition and passed on for recycling or disposal.

Old electrical and electronic appliances

This symbol means that the product must not be 
disposed of with other waste, and instead must be 
taken to the waste collection points for treatment, 
collection, recycling and disposal.

The symbol is valid in countries where waste 

electrical and electronic equipment regulations apply, e.g. 

"European Directive 2012/19/EC on old electronic and 
electrical appliances". These regulations define the framework 
for the return and recycling of old electronic appliances that 
apply in each country. 

As electronic devices may contain hazardous substances, it 
needs to be recycled responsibly in order to minimize any 
potential harm to the environment and human health. 
Furthermore, recycling of electronic scrap helps preserve 
natural resources. 

For additional information on the environmentally compatible 
disposal of old electrical and electronic appliances, please 
contact the relevant local authorities, your household waste 
disposal service or the retailer where you purchased the 
product.

You can find more information here: 
www.weee.bosch-thermotechnology.com/

Batteries

Batteries must not be disposed together with your household 
waste. Used batteries must be disposed of in local collection 
systems.

Fault code

Possible cause

EH b3

Communication fault between wired room 
controller and indoor unit. Check 
communication cable.

Summary of Contents for CRC R-1

















Reviews: