1 8 |
Control Air M/M+ Water to Water Applications
Installation & Operation Manual
02.2019 | BTC 469503103 A
Data subject to change
9.2.2.2 Touchscreen Screen
Figure 25
This screen provides the end-user the ability to edit and modify the
touchscreen settings.
Touch a button to go to one of these screens:
Screen
Description
About
Displays information about the touchscreen fi rmware
Inactivity
Timeout
Lets you defi ne how long the Control Air M can have
no activity before returning to the Standby screen and
logging out the user. Set to 0 to deactivate this feature
Sensor
Setup
Lets you set up the Control Air M temperature
and humidity sensors. See Using Control Air M’s
temperature and humidity sensors to control
equipment
Clean
Screen
Displays a one-minute count-down timer so that you
can clean fi ngerprints from the display window without
touching something that would aff ect equipment
operation.
Key Click
Off /On
Touch Key Click Off to turn off the sound when you
touch a fi eld or button. Touch Key Click On to turn on
the sound
Alarm
Sound
Off /On
Touch Alarm Sound Off to turn off the alarm notifi cation
sound or touch Alarm Sound On to turn on the sound.
An alarm will generate a sound only if it is set up by
Bosch
Reload
Firmware
Erases the current fi rmware so that you can load new
fi rmware through the USB port. See To update the
Control Air M/M+'s fi rmware
Passwords
Let you change the User or Admin password, if allowed.
Calibrate
Touch
Panel
Lets you recalibrate the Control Air M/M+ by touching
targets. The device is calibrated in the factory, but
time, temperature, or handling could aff ect the
calibration. Recalibrate the screen if you touch it in one
location and it responds as if you touched it in another.
Table 7
9.2.3 Alarms Settings Screen
The Alarm Settings screen can be accessed from the home page
through the Settings menu. This screen allows the user to adjust heat
pump unit alarm settings, including:
Set values for alarm trip limits on leaving water temperature.
Set values for entering water temperature differentials
Set Pump and compressor(s) runtime trip values.
Figure 26
Figure 27