background image

6

en | Introduction

CCS 900 Ultro

IOM_CCS900 | V1.0 | 2010.06

Installation and Operating Manual

Bosch Security Systems B.V.

2

Introduction

The CCS 900 Ultro Discussion System is a discussion system for use in meeting and 

conference venues with a limited number of participants.

A CCS 900 Ultro Discussion System consists of:

One Control Unit (CU).

Maximum 50 units of which one or more Chairman Unit(s).

Extension cables if required (5m or 10m).

Peripheral audio and/or telecommunication equipment.

A built-in MP3 recorder.

The 

CU

 is the heart of the discussion system which controls the microphones of the Chairman 

and Delegate Units as well as providing facilities for audio inputs and outputs. It also supplies 

the power for the CU itself, Chairman Unit(s) and Delegate Unit(s).

With the use of Digital Acoustic Feedback Suppression the loudspeaker volume can be 

increased significantly before feedback appears. A Digital Acoustic Feedback Suppressor is 

only available in CCS-CUD / CCS-CURD.

Delegate Unit

 enables participants to actively join in a discussion (i.e. speaking and 

listening) by means of a microphone, controlled by an on/off button and a built-in loudspeaker 

or external headphone.

Chairman Unit

 has the same function as a Delegate Unit with the addition of a 'Priority' 

button, that enables its operator to control the debate by temporary or permanently 

overruling and muting all active microphones, depending on an internal setting in the 

Chairman Unit.

The built-in 

MP3 recorder

 enables participants to: record discussions; listen to discussions 

before playing it back to the floor; play discussions back to delegates.

Summary of Contents for CCS 900 Ultro















































Reviews: