Bosch BX3, Instructions For Use Manual

Page: 18 / 157

12
en
Figure
Press the on/off button in the direction of the
arrow to switch your vacuum cleaner on/off.
Figure
Adjust the suction by turning the on/off
button in the direction of the arrow.
Set the power setting to maximum for the
best results when vacuuming. We
recommend that you reduce the setting only
when vacuuming very delicate materials.
Vacuuming
Figure
Adjust the adjustable floor tool:
Rugs and carpets =>
Hard/parquet floors =>
Figure
Adjust the "autofloor" floor tool:
Hard floor setting =>
Fixed position for vacuuming hard/parquet
floors
Automatic setting => auto
The floor tool adjusts automatically to the
floor covering and switches from
hard/parquet floors to carpeted floors
Carpet setting =>
Fixed position for vacuuming rugs and
carpets
If you are vacuuming varying types of floor
coverings (hard floors <-> carpets), we
recommend that you use the automatic
setting so that the floor tool adjusts
automatically to the floor and you do not
need to switch over the nozzle setting.
Figure
To clean the "autofloor" tool, switch it to the
hard floor setting and simply vacuum it using the
fixed / telescopic tube.
Figure
Remove the upholstery nozzle and crevice noz-
zle from the accessories holder as illustrated.
13
12
11*
10*
9
8
Figure Vacuuming with accessories
Attach the nozzles to the tube or handle as
required:
a) Crevice nozzle for vacuuming crevices and
corners, etc.
b) Upholstery nozzle for vacuuming upholstered
furniture, curtains, etc.
After use, push the crevice nozzle and
upholstery nozzle back into the accessories
holder as indicated. (see Figure 2)
c) Hard furnishings brush
For cleaning window frames, cabinets,
mouldings, etc.
d) Hard-floor brush
For vacuuming hard floor coverings (tiles,
parquet flooring, etc.)
Figure
Pet hair tool
Floor tool for easy, thorough removal of pet
hair
To clean the nozzle, simply vacuum it using
the fixed / telescopic tube
Figure
Once you have switched off the vacuum
cleaner, slide the catch on the floor too into
the groove at the rear of the appliance.
Once you have switched off the vacuum
cleaner, slide the catch on the floor tool into
the groove on the rear of the appliance.
!
Attention: Do not operate in an
upright/vertical position.
Figure
The appliance can also be carried using the car-
rying handle when vacuuming steps, for example.
When the work is done
Figure
Unplug the vacuum cleaner.
Tug the power cord briefly and let go. The
cable then rewinds automatically.
Figure
Unlock the telescopic tube by moving the
sliding button in the direction of the arrow
and slide one tube into the other.
19
18
17
16
15
14*
*Depending on equipment
Innenteil 161 767 C 03.07.2006 14:06 Uhr Seite 12