Bosch BSS1POWER, Instruction Manual

Page: 32 / 152

32
Cleaning the floor nozzle
Before carrying out any mainte-
nance work, switch off the vacuum
cleaner and disconnect it from the
charging cable.
Fig.
29
a) Turn the rotary brush anti-clock-
wise to unlock it and pull it out
to the side of the floor nozzle.
b) Use scissors to cut through th-
reads and hairs wound round the
brush and then remove them.
c) Slide the rotary brush in at the
side of the floor nozzle and along
the guide bar, and turn it clockwi-
se to lock it in place.
• The brush roller is also self-
cleaning. Use scissors to cut the
hairs and fibres lengthways on
two opposite sides. Then operate
the brush roller for 30 seconds to
vacuum these up automatically.
Caution!
The floor nozzle must only be
used with the brush roller fitted.
b
a
29
2
1
1
2
c
Cleaning the floor nozzle
en
32