Bosch BSGL4022GB, Instructions For Use Manual

Page: 3 / 20

3
Please keep this instruction manual.
When passing the vacuum cleaner on to a third party,
please also pass on this instruction manual.
Intended use
This vacuum cleaner is intended for domestic use only,
not for commercial use. Only use this vacuum cleaner
in accordance with the instructions in this instruction
manual.
The manufacturer will not accept any responsibility for
damage caused by improper use or incorrect operation.
Therefore, please note the following points.
The vacuum cleaner must only be operated with:
manufacturer's original dust bags
Original replacement parts, accessories or optional
accessories
The vacuum cleaner is not to be used for:
cleaning persons or animals
vacuuming up:
– Insects and spiders
– Hazardous, sharp-edged, hot or burning
substances.
– Damp or liquid substances
– Highly flammable or explosive substances and
gases
– Ash, soot from tiled stoves and central heating
systems
Safety information
This vacuum cleaner complies with the generally
accepted standards of technology and the relevant
safety regulations.
We confirm that it complies with the following
European directives: 2004/108/EC and 2006/95/EC.
Always observe the information on the rating plate
when using the vacuum cleaner and connecting to
the power supply.
Never use the vacuum cleaner without a dust bag.
=> This can damage the appliance.
Only allow children to use the vacuum cleaner under
supervision.
This appliance must not be used by persons with
limited physical, sensory or mental abilities or with a
lack of experience and knowledge (including
children) unless they have been instructed in the use
of the appliance by a responsible person.
Keep suction away from your face when using the
handle, nozzles or pipe. => There is a risk of injury.
Never carry the vacuum cleaner by the power cord.
Fully extend the power cord when using the vacuum
cleaner continuously for several hours.
When disconnecting the appliance from the mains,
pull the plug, not the power cord.
Do not pull the power cord around sharp corners or
allow it to become trapped.
Unplug the power cord from the mains before
carrying out any work on the vacuum cleaner or its
accessories.
Do not use the vacuum cleaner if it is damaged.
Unplug the power cord from the mains if a fault is
detected.
For safety reasons, only authorised after-sales
service personnel are permitted to carry out repairs
and fit replacement parts to the vacuum cleaner.
The vacuum cleaner should be protected from
outside weather conditions, moisture and sources of
heat.
The vacuum cleaner is not suitable for use on
building sites.
=> Vacuuming up building rubble could damage the
vacuum cleaner.
Switch off the vacuum cleaner when it is not in use.
At the end of its life, the vacuum cleaner should be
disposed of in an appropriate manner.
For safety reasons, vacuum cleaners with a power
rating of more than 2,000 W are fitted with a
temperature safety switch.
This automatically switches off the vacuum cleaner if
it is blocked and overheating. Unplug the vacuum
cleaner from the mains and make sure that the
nozzles, suction pipe and hose are not blocked and
check whether the filter needs replacing.
Having cleared the blockage, leave the vacuum
cleaner to cool down for at least one hour. It can
then be switched back on again.
Disposal information
Packaging
The packaging is designed to protect the vacuum
cleaner from being damaged during transportation.
It is made of environment-friendly materials and can
be recycled.
Dispose of packaging that is no longer required at an
appropriate recycling point.
Used vacuum cleaners
Used vacuum cleaners still contain many recyclable
materials.
Therefore, please take used vacuum cleaners to your
retailer or recycling centre so that they can be
recycled.
For current disposal methods, please enquire at your
appliance dealership or local council.
!
Please note
Only connect the appliance to a socket that is
protected by at least a 16 amp fuse.
If a fuse should blow when you switch on the vacuum
cleaner, this may be because other electrical
appliances which have a high current draw are
connected to the same power circuit.
To prevent the fuse from tripping, select the lowest
power setting before switching the vacuum cleaner
on, and increase the power only once it is running.