Bosch BSGL4022GB, Instructions For Use Manual

Page: 14 / 20

14
Changing the dust bag and filters
Clean the motor protection filter by tapping it.
If it is very dirty, the motor protection filter
should be rinsed out.
The filter must then be left to dry for at least 24
hours.
After cleaning, slide the motor protection filter
into the vacuum cleaner and close the dust bag
compartment lid.
Replacing the micro - filter
This should be replaced with every replacement
filter pack
Open the dust bag compartment lid.
Release the filter holder by moving the locking
lever in the direction of the arrow.
Remove the micro -filter. Insert the new micro -
filter into the filter holder.
Insert the filter holder into the vacuum cleaner
and clip into place.
If you have used the vacuum cleaner for
vacuuming fine dust particles, clean the motor
protection filter and, if necessary, replace the
micro - filter.
CLICK!