background image

When using the Hedge Trimmer ,always wear sturdy shoes with a non-slip sole. This protects against

injuries and ensures===good footing. (4)

2

Starting up the Hedge Trimmer

- Please make sure that there are children or other people within a

working range of 50 feet or 15 meters (5). also pay attention to

any

animals in the working vicinity

-

Before

operating,

always

check

that

the

Hedge

Trimmer is safe for operation:

Check the security of the throttle lever The throttle lever should be

checked for smooth and easy action. Check for proper functioning

of the throttle lever lock. Check for clean and dry handles and test

the function of the STOP switch. Keep handles free of oil and fuel

Start the Hedge Trimmer only in accordance with the instructions

Do not use any other methods for starting the engine (6)!

- Use the Hedge Trimmer only for applications specified

- Start the Hedge Trimmer enjine only after the entire assembly is

done Operation of the Hedge Trimmer is permitted only after all

the

appropriate accessories are attached!

- Before starting, make sure that the cutter blade will not contact

any

objects such as branches, stones, elc

- The engine is to be stopped immediately if there are any engine

problems

- When working with the Hedge Trimmer, keep both hands on

handles

always wrap your fingers tightly around the handle, keeping the

control handle cradled between your thumb and forefinger Keep

your hand in this position to have your times. Make sure your control

handle of moisture, pitch, oil or grease machine under control at all

is in good condition and free

Always ensure a safe, well-balanced footing

- Only use outdoors.

- Operate the Hedge Trimmer in such a manner as to avoid

inhalation of the exhaust gases.

Never run the engine in

enclosed

rooms(risk of suffocation and gas poisoning).Carbon monoxide is

an

odorless gas. Always ensure there is adequate ventilation.

- Stop the engine when resting and when leaving the Hedge

Trimmer

unattended. Place it in a safe location to prevent danger to others.

setting fire to combustible materials or damage to the machine.

- Never operate the engine with a faulty exhaust, muffler

- Stop the engine during transport (7).

- Secure the tool properly before transporting in vehicle to avoid

fuel

leakage.

- When transporting the Hedge Trimmer ensure that the fuel tank is

completely empty to avoid fuel leakage.

Refueling

- To reduce the risk of fire and burn injury; handle fuel with care.

It is

highly flammable.

- Stop the engine before refueling (7), keep well away from open

flare (8) and do not smoke

- Do not attempt to refuel a hot or a running engine.

- Avoid skin contact with petroleum products. Do not inhale fuel

vapor. Always wear protective gloves during refueling Change

and clean protective clothing at regular intervals.

- Take care not to spill either fuel or oil always wipe until dry before

starting engine. Allow wet cloths to dry before disposing in proper,

covered container to prevent spontaneous combustion

- Avoid any fuel contact with your clothing

Change your clothing

Summary of Contents for BPTHT230B



















Reviews: