en-us
Care and Maintenance
48
Drain pump
Large food remnants in the rinsing
water not retained by the filters may
block the waste water pump. In this
case:
■
Disconnect the appliance from the
power supply.
■
Remove the filters.
■
Scoop out standing water - use a
sponge if necessary.
■
Using a spoon, pry off the pump
cover until it clicks, then grip the
cover and pull upward until it
resists and then pull forward.
■
Check inner compartment and
remove any foreign objects.
9
WARNING
Use caution when removing
parts for cleaning as some
debris may be sharp.
■
Place cover in the original
position, press down and engage.
■
Reinstall filters.
Note:
The drain pump will not work
properly if the drain pump cover is
not snapped in completely until it
clicks.
&OLFN
