Getting Started
en-us
13
Settings
The dishwasher has been preset with
certain settings for your convenience.
You can change these factory
settings.
Change the setting as follows:
1.
Open the door.
2.
Switch on On/Off switch
(
.
3.
Press Info button
8
for
3 seconds until the following text
is indicated on the display window
at the top
@
:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4.
Keep pressing button
>
`
until
the required setting is displayed.
5.
Make the selection with setting
buttons
+ -
X
.
6.
Press and hold the Info button
8
for 3 seconds.
The chosen setting has now been
stored.
You have the option of resetting all
changed settings back to the original
factory settings.
Note:
When you reset your
dishwasher to the factory settings,
you are taken directly to the settings
for switching on the dishwasher for
the first time.
Setting
Factory setting
Infotext
by pressing Info button
Time setting
12:00
Set the current time.
Time format
12h
12h or 24h.
Time display
Time
Show end of wash cycle with display "Finish in" or "Fin-
ish at".
Language
American English
Language selection.
Water hardness
°E 0
Setting water hardness. When using Multitabs, select
the lowest setting.
Rinse aid disp.
Level 5
Amount of rinse aid affects drying. When using Multi-
tabs, select setting 0.
Sensor setting
Standard
Adjusting water clarity detection for best cleaning
results.
Extra dry
Off
Improved drying for glasses and plasticware.
Eco forecast
Off
Show the water and energy consumption.
Auto Power Off
Off
Appliance automatically switches off at end of rinsing
process.
Emotion Light™ *
On
Interior light.
Front display *
On
The front display can be selected.
Remaining time
proj. *
On
While wash cycle is running, status information is pro-
jected onto floor.
InfoLight® *
On
Light is projected to signal an active wash cycle.
* depending on the features of your dishwasher
