manualshive.com logo in svg

Bosch B450, Installation And Operation Manual

Share
Download
Bosch B450 Installation And Operation Manual Download Page 14

14

en | Installation

Conettix Plug-in Communicator Interfaces

2017.10 | 09 | F.01U.300.740

Installation and Operation Guide

Bosch Security Systems, Inc.

1.

Hold the module mounting brackets on the inside of the enclosure. Match the bracket
holes to a 3-hole mounting pattern on the enclosure

2.

Put the supplied mounting screws through the holes and into the mounting bracket.

3.

Tighten the screws.

4.3

Installing the tamper switch (optional)

Notice!
Dual tamper switch for compatible control panels

For control panels that are compatible with an enclosure tamper switch, you can use this
module to connect and monitor the tamper switch.

1.

Install the ICP-EZTS tamper switch. Use the instructions in the switch installation manual
(P/N: F01U003734).

2.

Connect the wire of the installed tamper switch wire to the tamper switch connector on
the module.

4.4

Installing the cellular antenna

1

2

Callout 

ᅳ

 Description

1 

ᅳ

 Plug-in cellular module antenna (routed through any knockout)

2 

ᅳ

 Antenna cable

1.

Place the magnetic antenna on top of the enclosure, or vertically on another metal
surface.

Notice!
Best performance

If the module has a weak signal, position the antenna on top of a metal surface that has a
radius of 10.16 cm (4 in).

Summary of Contents for B450


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands