Bosch B30 Series, Installation Instructions Manual

Page: 32 / 124

32
21. Attaching the adjusting rail to the
furniture door
̈
Unscrew the installation support part from the appliance
door.
̈
Measure the distance
X
between the adjusting rail and
the overhead furniture/fixtures.
̈
Loosen the 2 nuts and remove the adjusting rail.
̈
Mark this amount X on the rear of the furniture door.
̈
Determine and mark the centerline of the furniture door.
̈
Put on the adjusting rail and align along the marks.
Mark the drill holes.
̈
Drill the holes.
̈
Screw on the adjusting rail tightly.
Notes:
– Attach the adjusting rail to the furniture door with at least
6 screws. One screw should be inserted under each
double threaded bolt.
( * Wine unit)
–
The adjusting rail features a variety of holes for the many
different design options of furniture doors. Always screw
into the best load-bearing material of the furniture door.
NOTE
The adjusting rail is the most important means of adju-
sting the furniture front.
NOTE
Store the positioning aids, there will be used in an
installation step later.