Bosch B30 Series, Installation Instructions Manual

Page: 30 / 124

30
̈
Attach the base panel.
18. Commissioning the Appliance
To guarantee the accuracy of the following working steps
and thus the appearance of the overall kitchen front later on,
the appliance should now be operated.
̈
Open the appliance door.
̈
Press the POWER button.
Only for appliances with a water connection:
In order to avoid the risk of damage caused by leaking water
from damage possibly caused to the water pipe feeding the
appliance, keep the shut-off valve closed.
19. Preparing the furniture doors
Adjusting the furniture door
The furniture fronts are attached to the appliance door by
means of fitting parts on the appliance. These fitting parts
allow the furniture door to be adjusted precisely and
attached securely to the appliance.
NOTE
If required, the toe kick panel can be screwed to the
base panel. There are screw holes in the base panel
near the Velcro.
IMPORTANT NOTE
When performing any work on the furniture doors,
always observe the following:
– Always screw into the best load-bearing material of
the furniture door.
– Never screw into fillers, decorative strips or similar.
– Select a screw length which is always shorter than
the thickness of the furniture front.
– To prevent damage, protect surfaces of the furniture
doors during installation.
The total weight of the furniture front must not exceed
the following values:
– 18" Appliance
44 Ibs / 20 kg (19 lbs/8.5 kg *)
– 24" Applianc 55 Ibs / 25 kg (32 lbs/14.5 kg *)
– 30" Applianc 64 Ibs / 29 kg
( * Wine unit)