36
en | Camera
AUTODOME IP starlight 5100i
2020-11 | draft 0.9 |
User Manual
Bosch Security Systems
Intelligent streaming
The sharpness level,
Temporal noise filtering
and
Spatial noise filtering
can be automatically
adjusted here, through the encoder, for optimum intelligent streaming results.
Dynamic sharpness & noise filtering
Enable or disable the automatic adjustment of the encoder.
Priority encoder stream
Select stream 1, 2 or smart select as the priority stream for the encoder. The smart select
automatically selects the optimum stream.
7.2.4
Scene Mode Scheduler
The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
Select the mode you wish to use during the day from
Marked range
drop-down box.
2.
Select the mode you wish to use during the night from
Unmarked range
drop-down box.
3.
Use the two slider buttons to set the
Time ranges
.
7.3
Encoder Profile
For the video signal encoding, you can select a code algorithm and you can change the presets
for the profiles.
You can adapt the video data transmission to the operating environment (for example network
structure, bandwidth, data load). To this end, the camera simultaneously generates two data
streams (Dual Streaming), which compression settings you can select individually, for example
one setting for transmissions to the Internet and one for LAN connections.
Pre-programmed profiles are available, each giving priority to different perspectives.
You can change individual parameter values of a profile and you can also change the name.
You can switch between profiles by clicking the appropriate tabs.
!
Caution!
The profiles are rather complex. They include a large number of parameters that interact with
one another, so it is generally best to use the default profiles.
Change the profiles only once you are fully familiar with all the configuration options.
Note:
In the default setting, Stream 1 is transmitted for alarm connections and automatic
connections.
i
Notice!
All parameters combine to make up a profile and are dependent on one another. If you enter a
setting that is outside the permitted range for a particular parameter, the nearest permitted
value will be substituted when the settings are saved.
Profile name
If required, enter a new name for the profile.
Bit rate optimization
The bit rate optimization defines the optimization strength. These must be combined with the
appropriate scene mode. The
Bit rate optimization
and
Maximum bit rate
work in a quality-
driven mode. The encoder generates a bit rate up to the maximum setting if the scene
requires it.
For maximum image quality, apply minimum bit rate reduction (
Maximum quality
). This will
also greatly increase the file size. If maximum bit rate reduction is applied, the image will have
less quality, but the file size decreases significantly (
Minimum bit rate
).
Select the necessary bit rate optimization setting:
Summary of Contents for AUTODOME IP starlight 5100i
