AUTODOME IP starlight 5000i IR
Recording | en
45
Bosch Security Systems
User Manual
2019.11 | 1.2 |
Activating the Recording
After completing configuration you must activate the recording scheduler and start the
recording. Once recording is underway, the
Recording Profiles
and
Recording Scheduler
pages are deactivated and the configuration cannot be modified.
You can stop the recording activity at any time and modify the settings.
1.
Click the
Start
button to activate the recording scheduler.
2.
Click the
Stop
button to deactivate the recording scheduler. Running recordings are
interrupted and the configuration can be changed.
Recording status
The graphic indicates the recording activity of the camera. You will see an animated graphic
while recording is taking place.
7.6
Recording Status
Details of the recording status are displayed here for information. These settings cannot be
changed.
7.7
Recording Statistics
Recording
Identifies the current recording profile (1 or 2).
Zoom
Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x).
Averaging period
Select the appropriate averaging period as a means of stabilizing the long term bit rate.
7.8
Image Posting
Image size
Select the appropriate image size: Small, Medium, Large, 720p, 1080p,
Best possible
.
File name
You can select how file names will be created for the individual images that are transmitted.
–
Overwrite
The same file name is always used and any existing file will be overwritten with
the current file.
–
Increment
A number from 000 to 255 is added to the file name and automatically
incremented by 1. When it reaches 255 it starts again from 000.
–
Date/time suffix
The date and time are automatically added to the file name. When
setting this parameter, ensure that the unit's date and time are always correctly set.
Example: the file snap011005_114530.jpg was stored on October
1,
2005 at 11:45 and
30
seconds.
VCA overlays
To include VCA overlays in the email, select this check box.
Posting interval
Enter the interval in seconds at which the images will be sent to an FTP server. Enter 0 (zero)
if you do not want any images to be sent.
The following field may or may not appear, depending on your camera:
Post JPEG from camera
Click the checkbox to select the cameras from which JPEG images are sent. An enabled video
input is indicated by a check mark.
Summary of Contents for AUTODOME IP starlight 5000i IR
Page 1: ...AUTODOME IP starlight 5000i IR NDP 5512 Z30L en User Manual ...
Page 2: ......
Page 71: ......
