Installation and Setup
This section provides information for system planners and configurators.
Removing the Cover
Figure 4.1: Back of Transmitter
1 Retaining Screw
2 Lower Part
Instructions
1.
Remove the belt clip, if used.
2.
Remove the retaining screw on the back of the enclosure.
3.
Use a flat-head screwdriver to pry the lower part of the front cover away from the
enclosure.
Battery
The transmitter uses a CR2, 3 V lithium battery. The central console indicates when the
battery is low and needs replacement. Refer to Enabling and Disabling Features, page 10 for
battery polarity. The battery’s life depends on usage and enabled features.
Notice!
Batteries must not be disposed of in household waste. Please take used batteries to the local
collection points. See www.boschsecurity.com/standards for further information.
4
4.1
4.2
ALLPLEX track Personnel Transmitter
Installation and Setup | en
9
Robert Bosch (SEA) Pte Ltd
Installation Manual
2014.03 | V1.0.0 | DL
Summary of Contents for ATX-TRM-304T01
Page 1: ...ALLPLEX track Personnel Transmitter ATX TRM 304T01 ATX TRM 433T01 en Installation Manual ...
Page 2: ......
Page 18: ......
Page 19: ......