Bosch ARD-AYCE65B, Installation Manual

Page: 9 / 32

ARD-AYCE65B Wiring Instructions | en 9
Bosch Sicherheitssysteme GmbH Installation manual | V 1.1 | 2009.08
4 Wiring Instructions
The unit is supplied with a 1.5 meter (60-inch) pigtail, having a
6-conductor cable. To connect the unit to the controller,
perform the following:
Prepare the unit's cable by cutting the cable jacket back 1¼
inches and strip the wire ½ inch. Prepare the controller cable
by cutting the cable jacket back 1¼ inches and strip the wire ½
inch.
Splice the unit's pigtail wires to the corresponding controller
wires and cover each connection.
Refer to the wire color table below, and to the wiring diagram
provided on the following page.
If the tamper output is used, connect the purple wire to the
correct input on the controller.
Trim and cover all unused conductors.
Reader Color Functionality
5~16 VDC Red +DC Input
Shield/ Ground Black Ground
Data 1 / Clock White Communication
Data 0 / Data Green Communication
LEDCTL Brown LED Control / Auxiliary Input
Tamper Purple Tamper