AMC2 4W
Installing | en
33
Bosch Security Systems
Installation manual
F.01U.024.965 | V.4 | 2006.09
Fig. 5.10
Settings for RS-485 two wire connections
For RS-485 two wire connection set the AMC-MUX DIL-Switch
at the position
3
,
7
and
8
to
ON
. On the upper side of the AMC
panel put the jumper on the two pins on the right hand side of
the connector
8
(see also:
Figure 3.3
). Set the RS-485 address
of the AMC using the DIL-Switch - see
Section 5.6.3 DIL Switch
Address Selector
.
5.6.2
RS-485 Four Wire Connection
Fig. 5.11
Connection scheme of an RS-485 four wire connection
