Bosch AdvancedImpactDrive 18, Original Instructions Manual

Page: 12 / 175

12 | English
u
Always wait until the power tool has come to a com-
plete stop before placing it down.
The application tool
can jam and cause you to lose control of the power tool.
u
In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode.
Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
u
Do not open the battery. There is a risk of short-circuit-
ing.
u
The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u
Only use the battery with products from the manufac-
turer.
This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.
There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
(2) Locking sleeve
(3) Battery release button
A)
(4) Battery
A)
(5) Rotational direction switch
(6) On/off switch
(7) Handle (insulated gripping surface)
(8)
Screwdriver bit with ball catch
A)
(9) Screwdriver bit
A)
(10) Universal bit holder
A)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless Impact Wrench AdvancedImpact
Drive 18
Article number 3 601 J80 3..
Rated voltage V= 18
No-load speed
A)
min
-1
0–2600
Impact rate
A)
min
-1
0–3200
Maximum torque, hard
screwdriving application ac-
cording to ISO 5393
A)
Nm 130
Machine screw diameter mm M4–M14
Max. screw diameter mm 8
Tool holder ¼" internal
hexagon
Weight according to
EPTA-Procedure 01:2014
B)
kg 1.2–1.5
Recommended ambient tem-
perature during charging °C 0 to +35
Permitted ambient temperat-
ure during operation
C)
and
during storage
°C –20 to +50
Recommended rechargeable
batteries PBA 18V...W-.
Recommended chargers
D)
AL 18...
A) Measured at 20−25 °C with rechargeable battery PBA 18V
1.5Ah .
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
D) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/vibration information
Noise emission values determined according to
EN 62841-2-2 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
95 dB(A); sound power level
106 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 62841-2-2 :
Tightening screws and nuts of the maximum permitted size:
a
h
= 11 m/s
2
, K = 1.5 m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
1 609 92A 4XB | (17.11.2020) Bosch Power Tools