Video Recorder 600 Series
Configuration menu | en
63
Bosch Security Systems
Installation and Operation manual
F.01U.169.663 | v1.0 | 2010.09
6.5
Network
6.5.1
TCP/IP
Figure 6.14
Network - TCP/IP
1.
Enable
DHCP
to have the IP address, subnet mask, and default gateway assigned
automatically by the network server.
–
If DHCP is disabled, fill in the
IP address
, the
Subnet mask
, the default
Gateway
,
and the
Primary DNS
server address. If required, change the default
HTTP port no.
(80) to a new value.
2.
Restrict the network
Bandwidth limit
by entering a Mbps value between 512 Kbps and
100 Mbps.
3.
Enable the RTSP server to stream live video (for example, to a smart phone). If RTSP is
enabled (on), enter a TCP/IP port number (default port 554).
6.5.2
Streaming to mobile devices
The Real Time Streaming Protocol (RTSP) feature allows live video streaming over the
network.
Attention:
If you enable this feature (RTSP server to On) and the firewall on a ADSL router is opened,
anybody can view the cameras. There is no log-on user ID or password to protect a camera
live image.
6.5.3
Connecting using a smart mobile phone
Your smart phone should support RTSP network protocol and includes a RTSP capable player
application that can display H.264 video streams. The RTSP transports the remote (network)
stream or the local recording stream if the remote stream is disabled.Performance depends
on the decoding performance of mobile device. Streaming may fail if the bandwidth of the
internet connection is too low.You can connect to the DVR 600 to view one live-view channel
as follows:
1.
Enable RTSP On in Network-TCP/IP menu for DVR 600.