Bosch 600 Series Operation Manual Download Page 15

Page: 15 / 94

Video Recorder 600 Series

Introduction | en

Bosch Security Systems

Installation and Operation manual

F.01U.169.663 | v1.0 | 2010.09

2.3

Installation environment

2.3.1

Mounting

The DVR 600 Series is supplied as a desktop unit.

2.3.2

Ventilation

Ensure that the location planned for the installation of the unit is well ventilated. Take note of

the locations of the cooling vent in the unit's enclosure and ensure that they are not

obstructed as this might cause the unit to fail and void the warranty.

2.3.3

Temperature

Observe the unit's ambient temperature specifications when choosing an installation space.

Extremes of heat or cold beyond the specified operating temperature limits may cause the

unit to fail and void the warranty. Do not install the unit on top of hot equipment.

2.3.4

Power Supply

Ensure that the site's AC power supply is stable and within the rated voltage of the unit. If the

site's AC power is likely to have spikes or power dips, use power line conditioning or an

uninterrupted power supply (UPS), as otherwise the unit may fail.

2.3.5

Environment

The unit is designed to operate in a clean office environment. Elevated levels of dust may

cause the unit to failand void the warranty.

2.4

Associated equipment

A typical system could contain the following components (not included with the unit):

–

Primary VGA monitor for multiscreen monitoring (monitor A)

–

Second VGA monitor for spot/alarm monitoring (monitor B)

–

Cameras with 1 Vpp composite video outputs

–

Amplified microphone(s)

–

Audio amplifier with speaker(s)

–

Video coaxial cable with BNC connectors for connecting the video signals

–

Audio cable with RCA connectors for connecting audio signals.

–

AC power supply outlet for the power supply unit that allows for secure isolation (for

operational reasons, the unit has no on/off switch)

–

PC and network for the Control Center web-based application

–

Pan/tilt/zoom control units

–

Intuikey keyboard

2.5

Warranty

Failure to follow the Safety Instructions, Installation Instructions, and any other instructions

noted in this manual may result in damage to the unit and void the warranty.

Summary of Contents for 600 Series































































































Search results

Summary of Contents for 600 Series

Reviews:

Related manuals for 600 Series

Brands by name

Popular brands

Bosch 600 Series, Operation Manual

Search results

Summary of Contents for 600 Series

Reviews:

Related manuals for 600 Series

Brands by name

Popular brands