6
next selected scheduled time.
NOTE:
If program start times overlap, timer will start at the first time
selected and shut off at the latest time entered.
F. Turn dial to [ERASE]
This function allows you to erase a program that was previously entered.
a. Scroll through the program #’s using the [+] and [-] buttons.
b. Select the program # you wish to erase when it is lit by pressing [ENTER].
c. Now you are free to return to the PROGRAM SET function to reenter a
selection.
III. Attach Timer to Faucet
1. By hand, firmly attach the coupling nut on your timer to your faucet.
Do not use tools to attach as overtightening may occur.
IV. Attach Hose to Timer
1. Firmly attach your hose with sprinkler to the timer. Position your sprinkler
where desired in the yard. Damage to the timer or spigot may occur if your pull
on the hose too hard.
V. MANUAL ON / MANUAL OFF – 2 OPTIONS
This time has been designed to allow manual operations with both outlets.
MANUAL USE OF TIMED OUTLETS:
1. To use the outlets for a non-timed application: Turn on the faucet, depress
the [RIGHT ] and / or [LEFT ] on either side of the dial and water will start
running immediately. Water will continue to run until you depress the [RIGHT ]
and / or [LEFT ] again or until a program is scheduled to run. During manual
use, water will shut off after 3 hours.
