54
Basic Saw Operations
Detent Override
To Engage:
1.
Lift the miter detent trigger
1
(Figure 24).
2.
Push the detent override clip
2
forward and latch in place
over edge. Release miter detent trigger
1
.
3.
Move miter arm
3
to any position on the miter scale.
4.
Lock the miter lock knob
4
to retain miter position.
To Disengage:
5.
Loosen miter lock knob
4
and lift the miter detent trigger
1
to release the detent override clip
2
.
Sliding Base/Fence Extension
Extend and use sliding base/fence when
making severe bevel, severe miter or
compound cuts to provide sufficient (minimum 6”) spacing
from hand to saw blade.
Sliding Base:
1.
Remove hex wrench from storage position on left rear
leg.
2.
Loosen two (2) socket cap screws
5
in sliding base
channel with the 6 mm hex wrench provided (Figure 25).
3.
Extend sliding base/fence
6
to the desired position.
4.
Tighten screws. Store hex wrench.
Sliding Fence:
1.
Unlock the fence locking lever
7
(Figure 26).
2.
Slide fence to proper position
8
.
3.
Relock fence in place.
During transportation, sliding base and
fence should always be secured in the full
in position.
50
45
40
FIG. 24
FIG. 25
1
2
4
3
5
6
FIG. 26
7
8
WARNING
!
CAUTION
!
Summary of Contents for 3924-24
Page 86: ...86 Notes Remarques ...
Page 87: ...87 Notas ...
