Bosch 3 601 C96 009, Original Instructions Manual

Page: 18 / 281

18 | English
(7) Locking screw for protective guard
(8) Mounting flange with O‑ring
(9) Grinding disc
a)
(10) Clamping nut
(11) Quick-clamping nut
a)
(12) Carbide grinding head
a)
(13) Protective guard for cutting
a)
(14) Cutting disc
a)
(15) Hand guard
a)
(16) Rubber sanding pad
a)
(17) Abrasive disc
a)
(18) Round nut
a)
(19) Cup brush
a)
(20) Handle (insulated gripping surface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Angle grinder GWS 900 GWS 900
Article number 3 601 C96 00A 3 601 C96 009
Rated power input W 900 900
Power output W 450 450
Rated speed min
-1
11.000 11.000
Max. grinding disc diameter mm 115 125
Grinding spindle thread M 14 M 14
Max. thread length of grinding
spindle mm 22 22
Restart protection ● ●
Weight according to EPTA-Procedure 01:2014
– with low-vibration auxiliary
handle
kg 2.0 2.0
– with standard auxiliary handle kg 1.9 1.9
Protection class / II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-3 .
Typically the A-weighted noise level of the power tool are: 93
dB(A); sound power level 104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-3 :
Surface grinding (roughing):
a
h
= 7.5 m/s
2
, K = 1.5 m/s
2
,
Disc sanding:
a
h
= 7.5 m/s
2
, K = 1.5 m/s
2
.
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
Fitting Protective Equipment
u
Pull the plug out of the socket before carrying out any
work on the power tool.
Note: If the grinding disc breaks during operation or the
holding fixtures on the protective guard/power tool become
damaged, the power tool must be sent to the after-sales ser-
vice immediately; see the "After-Sales Service and Applica-
tion Service" section for addresses.
Protective guard for grinding
Place the protective guard (6) on the spindle collar. Adjust
the position of the protective guard (6) to meet the require-
ments of the operation. Lock the protective guard (6) by
1 609 92A 6FB | (19.02.2021) Bosch Power Tools