Technical information
Tronic 4000 T – 6721843807 (2022/06)
42
Table 7
Problems
9
Technical information
9.1
Technical data
This appliance meets the requirements specified by the European Directives 2014/35/EC and 2014/30/EC.
Table 8
Technical characteristics
The water is cold and
the notice on the
display is not showing.
▶ Check the electrical wiring to the appliance and that the ribbon cable between the
thermostat and the display is correctly connected.
If the problems persist,
▶ Replace the display, in the first instance.
If the problems still persist,
▶ Replace the thermostat.
The buttons don't work
and a "padlock" lights
up intermittently.
▶ Check to see if the parental lock has been activated.
▶ Unlock the parental lock by pressing simultaneously (>3 s.) the
and
h
buttons.
The "padlock" symbol should disappear from the display.
1) Solutions must only be carried out by specialised and qualified persons.
Code
Problem
Solutions
Technical characteristics
Unit
7736506565
7736506566
7736506567
General details
Capacity
l
50
75
95
Weight with empty tank
kg
15
20
24
Weight with full tank
kg
65
94
119
Heat loss through casing
kWh/24 h
0.81
1.13
1.34
Data relating to the water
Max. permissible operating pressure
MPa (bar)
0.8 (8)
0.8 (8)
0.8 (8)
Water connections
Inch
½
½
½
Electrical details
Rated output
W
1500
2000
2000
Heating time (
T-50 °C)
2 h 04 m
2 h 21 m
3 h 28 m
Supply voltage
VAC
220 - 240
220 - 240
220 - 240
Frequency
Hz
50 - 60
50 - 60
50 - 60
Single phase electric current
A
6.5
8.7
8.7
Power cord
HO5VV - F 3 x 1.0 mm
2
or HO5VV - F
3 x 1.5 mm
2
HO5VV - F 3 x 1.0 mm
2
or HO5VV - F
3 x 1.5 mm
2
HO5VV - F 3 x 1.0 mm
2
or HO5VV - F
3 x 1.5 mm
2
Protection class
IP24
IP24
IP24
Type of protection
Class I
Class I
Class I
Water temperature
Temperature range
°C
30 - 70
30 - 70
30 - 70
