1 689 989 347
2018-02-08
|
Robert Bosch GmbH
1 687 023 850 – 858 | 17
en
5.2.4
Use
i
Take the action described below in the given se-
quence if the application or PC no longer reacts.
Contact Customer Service if this action does not
help.
Windows task manager
1.
Press <
Ctrl
> +
<
Shift
> +
<
Esc
>.
"
Windows Task Manager
" is displayed.
2.
Select the application which is not reacting.
3.
Select <
End Task
>.
The selected application is terminated.
Forced switch-off
1.
Press the power key on the front of the PC for more
than three seconds.
The operating system shuts down.
2.
Press the power key on the front of the PC.
The operating system starts up.
6. Maintenance
!
Work on electrical equipment is only to be per-
formed by persons with sufficient knowledge and
experience of electrical systems.
6.1
Ultrasonic cleaning
!
Do not use abrasive cleaning agents and coarse
workshop cloths.
¶
The housing is only to be cleaned with a soft cloth
and neutral cleaning agents.
6.2
Preventive maintenance
i
The PC does not require any special maintenance
work. Keep the PC clean.
6.3
Recovery process
!
All data and programs on the hard disk will be
erased during the recovery process.
i
All keyboard input, regardless of the keyboard con-
nected, is based on a QWERTY keyboard layout. Note
any country-specific variations that may apply.
1.
Switch on the PC/laptop.
2.
Insert the recovery DVD.
3.
Press <
F8
> during the startup process.
4.
Enter the password "
ia4kd
" to open the Boot Ma-
nager.
The Boot Manager is displayed.
5.
In the Boot Manager, select the option "
UEFI: ... DV-
DRAM ...
" .
6.
Confirm selection with
E
.
7.
Press any key to start from the Recovery DVD.
The command line opens.