1 689 989 347
2018-02-08
|
Robert Bosch GmbH
12 | 1 687 023 850 – 858
en
2. User information
2.1
Important notes
Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Test Equipment". These instructions must be carefully
studied prior to start-up, connection and operation of
the 1 687 023 850 – 858 and must always be heeded.
2.2
Safety instructions
All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety inst-
ructions for Bosch Test Equipment". These instructions
must be carefully studied prior to start-up, connection
and operation of the 1 687 023 850 – 858 and must
always be heeded.
2.3
Disposal
This 1 687 023 850 – 858 is subject to Euro-
pean guidelines 2012/19/EU (WEEE).
Old electrical and electronic devices, including-
cables and accessories or batteries must be
disposed of separate to household waste.
¶
Please use the return and collection sys-
tems in place for disposal in your area.
¶
Damage to the environment and hazards to
personal health are prevented by properly
disposing of 1 687 023 850 – 858.
3. Product description
3.1
Intended use
The PC is intended for use in conjunction with products
from Robert Bosch GmbH (e.g. BEA, FSA, EPS). Any
other or additional application, e.g.in conjunction with
non-approved non-Bosch products, does not constitute
the intended use. The operator of the system is liable
for any damage resulting from such usage and not Ro-
bert Bosch GmbH.
i
As standard, the PC is already installed and connec-
ted in Robert Bosch GmbH products on delivery.
3.2
Operating environment
3.2.1
Ambient conditions
¶
The PC is to be protected against water and other
moisture, high temperatures and high humidity.
¶
Never operate the PC in the vicinity of products
which generate high temperatures or electromagne-
tic fields.
¶
Make sure the vent openings in the housing are not
obstructed.
¶
Position the PC on a stable, clean surface and do not
stand anything on the PC connecting cables.
3.2.2
Voltage supply
¶
Make sure the power supply corresponds to the
voltage indicated on the PC.
¶
Make sure the three-wire grounding-type connector
of the power supply unit is connected to a grounding
outlet.
¶
If the PC is connected by way of an extension cable,
make sure the total current level of all the devices
connected to this extension cable does not exceed
the permissible current level for the extension cable
and the fuse in the fuse box.