English |
15
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.
There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for copy routing as well as routing
grooves, edges, profiles and elongated holes in wood,
plastic and light building materials while resting firmly on the
workpiece.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Drive unit
(2)
Routing base
(3)
Knurled screw for routing base
(4)
Knurled screw for parallel guide/pilot
(5)
Router bit
(6)
Collet with cap nut
(7)
Spindle lock button
(8)
Guide plate
(9)
Base plate
(10)
Adapter for dust extraction
(11)
Wing bolt for routing base
(12)
Speed preselection thumbwheel
(13)
On/off switch
(14)
Battery charge indicator
(15)
Rechargeable battery
a)
(16)
Battery release button
a)
(17)
Handle (insulated gripping surface)
(18)
Scale for setting the routing depth
(19)
Tool holder
(20)
Open-ended spanner (13 mm, 22 mm)
(21)
Guide bushing
a)
(22)
Parallel guide
(23)
Wing bolt for parallel guide (2 x)
(24)
Guide
a)
(25)
Wing bolt for fixing the horizontal alignment of the pi-
lot
a)
(26)
Wing bolt for horizontal alignment of guide
a)
(27)
Roller
a)
(28)
Dust extraction adapter
a)
(29)
Extraction hose
a)
(30)
Routing adjustment aid
(31)
Worklight
(32)
K marking
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Edge router
AdvancedTrimRouter
18V-8
Article number
3 603 JD5 0..
Rated voltage
V=
18
No-load speed
min
-1
10,000–
30,000
Speed preselection
●
Connection for dust extraction
●
Tool holder
mm
6/8
Weight according to
EPTA-Procedure 01:2014
A)
kg
1.4 (1.5 Ah) –
1.7 (6.0 Ah)
Recommended ambient tem-
perature during charging
°C
0 to +35
Permitted ambient temperature
during operation
B)
and during
storage
°C
–20 to +50
Recommended rechargeable
batteries
PBA 18V...W-.
Recommended battery char-
gers
C)
AL 18...
A) Depends on battery in use
B) Limited performance at temperatures < 0 °C
C) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-17
.
Typically, the A-weighted sound pressure level of the power
tool is
78
dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated.
Wear hearing pro-
tection !
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841-2-17
: a
h
=
1.0
m/s
2
,
K =
1.5
m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
Bosch Power Tools
1 609 92A 6FL | (29.09.2021)
