English |
11
Action
Figure
Page
Switching on and off
D
Adjusting the airflow speed
E
Working Advice
F
Maintenance
G
Accessories
H
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
Symbol
Meaning
Movement direction
Switching on
Switching off
CLICK!
Audible noise
Accessories
Troubleshooting
The following chart lists problem symptoms, possible causes and corrective action, if your machine does not operate properly.
If these do not identify and correct the problem, contact your service agent.
Warning: Switch off before investigating fault.
Warning: In the event of an accident or tool breakage, stop the machine immediately and remove the battery.
Problem
Possible Cause
Corrective Measure
Machine fails to oper-
ate
Battery discharged
Recharge battery
Battery not fully connected
Insert the battery correctly (see figure
C
)
Battery too hot/cold
Allow to cool/warm. Always start the product at a
low speed
Machine defective
Contact Service Agent.
Garden tool functions
intermittently
On/Off switch defective
Contact Service Agent.
Controller for airflow speed damaged
Contact Service Agent.
Excessive vibrations/
noise
Machine defective
Contact Service Agent.
Run time per battery
charge too low
Battery has not been used for long period or only
for short terms
Charge battery completely
Defective battery
Replace battery
Machine blow
Tube obstructed
Clear tube
Reduced airflow
Air inlet obstructed
Clear air inlet
Battery too cold
Always start the product at a low speed
Tube cannot be moun-
ted on the machine
Incorrect assembly
Mount the tube correctly (see figure
B
)
Maintenance and Service
Maintenance, Cleaning and Storage
u
Have your product serviced only by a qualified spe-
cialist using only original replacement parts.
This will
ensure that the safety of the product is maintained.
u
Never service damaged battery packs.
Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at:
www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Bosch Power Tools
F 016 L94 483 | (03.05.2022)