BOS ENGINEERING thanks and congratulates you on your choice of damper for motorbike.
Your new BOS high performance damper is developed from our years of experience on two and four wheels
in official teams on all type of surface thanks to our succesful co-operation with winning. Our success and
results gained in few years show the full and the exclusive implication of BOS ENGINEERING in the research
of performance.
The BOS damper you just bought is especially developed for your bike and your type of race. The choice of
our technical solutions, the quality of our materials, the precision and the attention brought to the
assembly operations allow your new BOS dampers to be an absolute weapon to win.
You will find on this user guide all the information needed to get the best of your BOS damper in term of
mounting, setup or maintenance. This handbook talks about lots of subjects for which a private or
profesional pilot can be confronted to setup his dampers.
We wish you a good reading and hope this document will guide you in your life of pilot…
NB : BOS ENGINEERING never stop to increase the range of product in terms of design and quality.
Therefore, while this user guide contains the main information and pictures of products, there may be
minor differences between this guide and your BOS dampers.
1 INTRODUCTION
CAUTION !
Never try to disassemble your shock. Limit yourself to the instructions given in this manual.
This shock is pressurized, for your own safety, do not try to open it.
Contact an authorized service center for any maintenance operation.
