BOS BS-IPT4002LPR User Manual Download Page 65

Page: 65 / 78

BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE

Table 4-6-3 Description of the buttons

Each

time

when

item

checked, the list will add the item row, including the item name and

Parameters

Function Introduction

Font Size

Small/Medium/Large are available for OSD information.

Note:

Snapshot OSD font size and Image OSD font size are corresponded.

Font Color

Enable to set different color for OSD information

Note:

Snapshot OSD font color and Image OSD font color are corresponded.

Background Color

Check the checkbox to select background color of snapshot OSD information.

Note:

Background color cannot be the same with font color.

OSD Position

Check the checkbox to show OSD information position.

OSD Information

Customize the OSD content. You can set OSD Information as shown below:

When license plate is recognized and the alarm is triggered, the snapshot of
license plate recognition will show as below:

Separator

“

”

“

”

and Space are available for File Name Separator format.

The default separator is

“

”

Item of File Name

You can customize the snapshot file name according to items chosen.

The default items checked are Time and License Plate.

Summary of Contents for BS-IPT4002LPR















































































Search results

Summary of Contents for BS-IPT4002LPR

Reviews:

Related manuals for BS-IPT4002LPR

Brands by name

Popular brands

BOS BS-IPT4002LPR, User Manual

Search results

Summary of Contents for BS-IPT4002LPR

Reviews:

Related manuals for BS-IPT4002LPR

Brands by name

Popular brands