BOS BS-IPT4002LPR, User Manual

Page: 64 / 78

64
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
Enable LPR Message Post
Check the checkbox to enable LPR Message Post. It will push information to
some third-party devices or software that are compatible with ours.
Post Type
Information can be pushed by RTSP , TCP or HTTP .
HTTP Method
There are two HTTP push methods, including Post and Get.
Snapshot Type
Three kinds of snapshot can be chosen: All, License Plate and Full Snapshot.
When you choose All, License Plate Snapshot and Full Snapshot will be
pushed.
Note: This option is available just for Post HTTP Method.
HTTP Notification URL
LPR camera can use the API URL to send LPR information to back-end devices
when the license plate is recognized. API URL format fills as below:
http://IP:Port/api/lpr?
User Name
Receiver name
Password
Receiver Password
Note
：
License Plate Serial Format function supports formulating identification rules and can automatically do
further processing, filter license plates in non-compliant formats to achieve more intelligent and accurate
license plate recognition.
Advanced
In the interface, you can set display information on snapshot of license plate recognition, and also
customize the file name of snapshots which are uploaded via FTP or Email or stored on local LPR
Picture File Path.