Bort 93410587, Manual

Page: 8 / 32

8
4 . Fabric ironing support;
5 . Telescopic pole;
6 . Steam hose;
7 . Water tank;
8 . Switch;
9 . Pressure gauge;
10 . Hose connector;
11 . Wheel .
SCOPE OF DELIVERY
The scope of delivery of your appliance is illustrated on
the packaging . Check the contents of the appliance for
completeness when unpacking .
Product Life:
The service life of the product is 5 years .
Production date:
Is indicated on the packaging of the goods .
Shelf life:
Shelf life is not limited (subject to storage conditions) .
Storage conditions:
Products are stored in dry, ventilated warehouses at tem-
peratures from 0 ° C to +40 ° C with a relative humidity of
not more than 80% .
Transportation:
It is strongly prohibited dropping and any mechanical im-
pact on the packaging during transportation .
When unloading / loading, it is not allowed to use any
type of equipment that works on the principle of packing
clamping .
SAFETY
• Stay alert, watch what you are doing and use common
sense when operating a power tool .
• The appliance may not be used in areas where a risk of
explosion is present .
• If the appliance is used in hazardous areas the corre-
sponding safety provisions must be observed .
• Never use the appliance in pools containing water .
• Check the faultless condition of the appliance and the
accessories before using it . Otherwise, the appliance
must not be used . Please check in particular the power
cord, the safety lock, and the steam hose .
• If the power cord is damaged, please arrange immedi-
ately for the exchange by an authorized customer ser-
vice or a skilled electrician .
• Please arrange for the immediate exchange of a dam-
aged steam hose . You may only use a steam hose that is
recommended by the manufacturer .
• Never touch the mains plug and the socket with wet
hands .
• Never use the appliance to clean objects containing
hazardous substances (e .g . asbestos) .
• Never touch the steam jet from a short distance with
your hands and never direct the steam jet to persons or
animals (risk of scalds) .
• The appliance may only be connected to an electrical
supply which has been installed in accordance with IEC
60364 .
• The appliance may only be connected to alternating
current . The voltage must correspond with the type
plate on the appliance .
• In wet rooms, e .g . bathrooms, connect the appliance to
sockets with a series connected RCD adapter .
• Unsuitable extension cables can be hazardous . Only use
a splashproof extension cable with a minimum section
of 3x1 mm² .
• The connection between power cord and extension ca-
ble must not lie in water .
• If couplings of the power cord or extension cable are re-
placed the splash protection and the mechanical tight-
ness must be ensured .
• The operator must use the appliance correctly . When
working with the appliance, he must consider the local
conditions and pay due care and attention to other per-
sons, in particular children, who are nearby .
• This device is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental
abilities or lacking experience and/or knowledge, unless
they are supervised by a person responsible for their
safety or are instructed by these persons on the use of
the device . Children should be supervised, to ensure
that they do not play with the device .
• Never leave the appliance unattended when it is in op-
eration .
• Make sure that the power cable or extension cables are
not damaged by running over, pinching, dragging or
similar . Protect the power cable from heat, oil, and sharp
edges .
• Never fi ll solvents, solvent-containing liquids or undi-
luted acids (e .g . detergents, benzene, paint thinner, and
acetone) into the water reservoir as these substances
affect the materials used on the appliance .
• Protect the appliance from rain . Do not store outside .
• Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication . A moment of
inattention while operating power tools may result in
serious personal injury .
QUICK REFERENCE (FIG. 3)
• Stainless steel pole consists of four sections . Draw sec-
ond section out, rotate along clockwise direction, and
lock up . Its height can be fixed according to specific