3
Note: we recommend that fresh water be used each time the appliance is used.
WARNING: Do not allow the water to drop below the ‘MIN’ level during operation.
Severe damage to the heating element could result.
Note: Always switch the appliance off allow the water to cool before emptying.
Note: Always switch off and disconnect the appliance from the power supply before
cleaning. Always allow the appliance to cool before emptying or cleaning.
Operation
1.
Connect the appliance to the power supply.
2.
Fill the tank with water to a level between the ‘MIN’ and ‘MAX’ marks on the inside of the tank.
3.
Switch the rocker switch to the On position [I]. The rocker switch light will turn on.
4.
Turn the thermostat to the desired temperature to heat-up the appliance.
5.
Once the appliance has heated the water, the pilot light turns Off.
6.
Reduce the heat setting on the thermostat to maintain temperature.
Maintaining Water Levels
It is important to regularly check the water level in the Food Warmer tank.
• Always keep the water level above the ‘MIN’ mark on the inside of the tank during operation.
• Damage to the heating element can occur if the tank boils dry and the element may have to be
replaced.
• This is not covered by the warranty.
Emptying the Appliance
BNKC-5737C0
- Use a suitable container to remove the water from the appliance.
BNKC-5737C0T
- Turn on the tap to drain the water. Ensure a suitable container is used to collect the
water.
Cleaning, Care & Maintenance
• Wipe down the exterior of the appliance with a damp cloth.
• Some cleaning agents may cause damage when used for a prolonged period on stainless steel. Use a
suitable stainless steel cleaner.
• Dry the exterior thoroughly.
• Wash all removable parts in warm, soapy water.
