background image

EN

There is a risk to life if these safety  

instructions are not observed!

• The personal protective equipment 

(PPE) may no longer be used even in 

the case of very minor faults.

• Damaged, fall-stressed, dubious 

personal protective equipment or 

safety devices must be immediately 

withdrawn and not used. The  

equipment may only be inspected by 

an expert in compliance with DGUV 

principle 312-906, by BORNACK or by a 

workshop authorised in writing by 

BORNACK.  This must be documented 

in the test card.

• Independent modifications or repairs 

are not allowed.

• •Rope protection is part of the 

personal fall prevention equipment 

and should be assigned to a specific 

person.

• The personal protective equipment 

may only be used by qualified staff 

that are familiar with the material. 

They must be proficient in handling 

the personal protective equipment 

and must have been briefed about the 

possible risks associated with its use.

• In accordance with the accident 

prevention guidelines (UVV), the users 

of fall protective equipment (Category 

III) must attend a theoretical training 

course and a practical training course. 

To this end, profit from the training 

competence of the BORNACK training 

centres [email protected]

• Accessories from other manufacturers 

may only be used if approved by 

BORNACK and may not impair the 

function and safety of the protective 

equipment.

• Clothing and shoes must be suitable 

for the task at hand and the weather 

conditions.

• Only use if fully fit and healthy. Health 

impairments can jeopardise the safety 

of the user when working at heights or 

depths.

• If this PPE is used as an arresting 

system (free fall is possible), only full 

body harnesses that comply with  

EN 361 may be used.

• Calculation of the possible fall path, if 

all necessary PPE components are used 

correctly: (if necessary braking path 

HSG) + surplus connector (situation-

dependent) + braking path energy 

absorber (max. 1.75 m) + height of 

D-ring (1.5 m) + safety reserve 1.0 m.

• Before using, ensure adequate  

clearance below the user to prevent 

impact on a protruding object or the 

ground.

SAFETY INSTRUCTIONS

Summary of Contents for O LIGHT





















Reviews: