2 | 3
INTENDED USE
The connector O LIGHT is part of
personal protective equipment (PPE) of
category III to prevent falls from heights.
The O LIGHT serves to connect several
parts of a securing system. The upper
and lower part of the O LIGHT are
connected to each other with screws.
The special design allows loads up to
20 kN despite the divisibility of the
connector.
Application temperature: -20 °C to
+60 °C
All other uses are deemed improper. The
company BORNACK will not be liable for
any ensuing damages. The user bears
the sole risk.
EQUIPMENT
• Ring-shaped connector made of
aluminium with a red upper part and
black lower part
• Fastener opening width: 22 mm
• Inner diameter: 38 mm
• Outer diameter: 70 mm
• Diameter of the cross-section: 16 mm
• 2 stainless steel screws with O rings
made of rubber to ensure that the
screws fit tight
• Allen wrench SW 3 mm
USE
• Connection of several parts of a
securing system
O LIGHT
Connector
Subject to technical changes
BRIEF DESCRIPTION