6 | 7
O LIGHT IN USE
F
Screw in both screws using the Allen
key in a clockwise direction and
tighten up to 2.0 Nm.
CAUTION THREAT TO LIFE:
Only a connector that is assembled
correctly is able to withstand the stated
loads! Therefore, always carry out a
visual inspection and test the function
every time before use!
Check:
Do the screws sit tightly?
Are the screw heads lowered into the
upper part and do they not protrude?
The upper and lower part of the O LIGHT
sit tightly on each other and cannot be
taken apart or pushed against each
other?
CAUTION:
Even if the connector has been closed
for a longer period, the tightening
torque should be checked at regular
intervals.
2,0 Nm
F
